Key takeaways
- Size your line by upload as well as download. Zoom, Teams and Google Meet list up to about 4 Mbps per person for HD video, so 12 people on calls at once need roughly 48 Mbps each way before headroom.
- You need a static IP when a client, VPN, SIP provider or PTA whitelisting has to recognise your office. Otherwise a normal shared connection is fine.
- A backup line only helps if it comes from a different provider and your router switches to it. Some routers take minutes to detect a line that is up but not passing traffic.
- The fibre box (ONT) and router need power. Put them on a UPS, or your internet goes down with the electricity.
- Get the upload speed, static IP charges and repair time in writing before you sign with an ISP.
For a small team in Lahore, choose a fibre line sized by upload as well as download (about 4 Mbps each way per person on HD video calls at the same time), add a second line from a different provider with a router that fails over automatically, and put the fibre box and router on a UPS. Pay for a static IP only if clients, VPNs, VoIP providers or PTA whitelisting need to recognise your office.
Most teams buy internet by the headline download speed. For a software house or BPO, three other things matter more: upload, what happens when the line fails, and what happens when the power fails. This guide covers each, as of November 2026.
Fibre, copper, wireless or mobile: which connection?
Providers in Lahore sell several kinds of connection. Availability depends on your exact building, so ask each provider to confirm coverage at your address.
| Connection type | What it is | What to check |
|---|---|---|
| Fibre to the premises | Fibre runs into your office and ends at a small box (ONT) | Upload speed, static IP option, power for the ONT |
| Copper (DSL) or cable | Uses existing phone or cable wiring | Upload speed, which is often well below download on these plans; ask for it in writing |
| Fixed wireless | A radio link from a provider’s tower to an antenna on your roof | Line of sight, weather, whether the tower has power backup |
| Mobile data (4G) | A SIM-based router or phone hotspot | Data caps, shared tower capacity, best kept as a last resort |
For a team that lives on video calls and pushes code all day, fibre is usually the first choice where it is available. Whatever you pick, compare plans on upload speed, delay and reliability, not just download.
PTA sets minimum standards for fixed broadband. Announcing its Fixed Broadband Quality of Service Regulations 2022, PTA said the minimum download throughput rose to at least 4 Mbps with 2 Mbps upload, and that providers must make 80% of the advertised download speed available to users at all times. Those are floors for consumers, not targets for a business, but they give you something to measure a provider against. Check PTA’s site for later amendments.
How much speed a small team needs: upload matters
Video calls send as much as they receive. These are the published figures for HD video from the three main tools:
| Tool | HD video per person (up / down) | Source |
|---|---|---|
| Zoom, group call at 1080p | 3.8 Mbps / 3.0 Mbps | Zoom Support |
| Microsoft Teams, meetings (recommended) | 2.5 Mbps / 4.0 Mbps | Microsoft Learn |
| Google Meet, 1080p (small organisations) | Up to 3.6 Mbps / up to 3.6 Mbps | Google Workspace Admin Help |
Audio alone is light: Zoom lists 60 to 80 kbps for audio VoIP. Taking about 4 Mbps each way as a safe per-person figure, here is our own arithmetic for a team where everyone could be on a call at once:
| Team size | Peak video calls (each way) | With headroom for pushes, downloads and updates |
|---|---|---|
| 6 people | About 24 Mbps | About 50 Mbps each way |
| 12 people | About 48 Mbps | About 100 Mbps each way |
Speed is only half of it. Cisco’s summary of ITU-T G.114 says one-way delay of 0 to 150 ms is acceptable for most user applications, while above 400 ms is unacceptable for network planning. Microsoft also warns that Wi-Fi is not always set up for real-time media, so wire the desks that make the most calls. For a fuller breakdown, see how much internet speed a remote team really needs.
Do you need a static IP?
A static (dedicated) IP is a fixed public address used only by your team. You need one when something outside must recognise your office:
- a client whitelists the IP your developers connect from,
- your VPN, firewall or cloud admin panel only accepts known addresses,
- a SIP or VoIP provider locks your account to your IP,
- you are applying for PTA IP whitelisting, which requires a static IP.
If none of these apply, a normal shared connection with strong passwords and multi-factor sign-in is fine. Our guide to dedicated IP vs shared IP explains the difference and the signs you have outgrown a shared address.
A backup line and how failover works
One line is a single point of failure. A backup line protects you from cable cuts, a fault at the provider and maintenance work. To get the most from it:
- Use a different provider, ideally on a different physical route, so one fault does not take both down.
- Use a dual-WAN router that watches both lines and switches automatically.
- Know how fast it switches. Cisco Meraki’s failover documentation says failover happens immediately if the physical link is lost, but a “soft failure” (the line is up but not passing traffic) can take about five minutes on its default checks. Other routers behave differently, so test yours.
- Expect live calls to drop. Traffic moves to a different public address, so calls and VPN sessions usually reconnect.
- Whitelist the backup address too. If clients or PTA know only your main IP, systems that check your address will reject you while you are on the backup.
Size the backup for the work that must not stop, such as calls and client access, even if it cannot carry everything.
SLAs and questions to ask an ISP
Business plans often come with a service level agreement (SLA). Get it in writing, and read what it promises before you compare prices.
| Ask | Why it matters |
|---|---|
| What upload speed is guaranteed, not just advertised? | Video calls and code pushes depend on upload |
| Is the line shared (contended) with other customers? | Shared capacity slows down at busy times |
| How much is each static IP, and is it used only by you? | Needed for whitelisting; some “static” IPs are shared |
| What is the committed repair time, and is there a credit if it is missed? | Tells you how long an outage can last |
| Is there a 24-hour business support number? | Night-shift teams need help at night |
| Does your local equipment (street cabinet, tower) have power backup? | Your UPS cannot keep their equipment running |
| What is the minimum contract, and the cost to leave early? | Avoids being locked into a poor line |
| Is there an installation fee, and who owns the router and ONT? | Hidden one-off costs |
Run speed and delay tests at your busiest hours during the first weeks, and keep the results. They are your evidence if you need to escalate.
Load-shedding: put the ONT and router on a UPS
The fibre box needs electricity. One provider’s guide puts it plainly: the ONT “requires power to operate”, and without it your internet will not work in a power cut. The same applies to your router, switches and Wi-Fi access points.
- Put the ONT, router, switch and Wi-Fi on a UPS, not just the desks.
- Check the UPS covers the gap until a generator starts, and that batteries recharge between back-to-back cuts.
- Remember the provider’s street equipment also needs power, which is another reason for a second line on a different route.
Our guide to load-shedding and choosing a workspace compares UPS, generator and solar options.
PTA IP whitelisting basics for call centres
If your team runs VoIP or a call centre, your internet setup has a regulatory side. PTA’s VPN Registration and IP Whitelisting System requires a static IP, and asks call centres for a CNIC copy, proof of incorporation or active taxpayer status, and a PSEB call center registration certificate. It also checks your subscriber details with your internet provider, and a fee applies once you whitelist five or more IPs. This is general information as of November 2026. Confirm the current rules with PTA or PSEB, and read VoIP and PTA rules for call centers and how to set up a small call center in Lahore.
Where Uplyft fits
Uplyft in Gulberg 3 has 200 Mbps internet as standard, with faster speeds of up to 500 Mbps for private rooms at extra charge, plus a 200 Mbps backup line and 8 hours of electricity backup, so a small team does not have to arrange a second provider and power backup itself. Use the sizing table above to judge whether the standard speed is enough for your team or whether the upgrade or a dedicated line makes sense, and ask us how the connection is shared. Private 6-seat rooms cost PKR 22,500 per seat a month, plus 16% GST, and can get a dedicated line with dedicated IPs on demand at extra charge. The IPs are licensed to Prosigns and are for lawful business use only, and teams using VoIP are responsible for PTA rules.
See office space for software houses in Lahore for room details, and our guide to setting up an office for a small dev team.
Frequently asked questions
What internet speed does a 10-person software team need?
Based on Zoom, Microsoft Teams and Google Meet figures, plan for about 4 Mbps each way per person who might be on an HD video call at the same time, so about 40 Mbps each way for 10 people, then roughly double it for code pushes, downloads and headroom. Upload speed matters as much as download.
Do I need a static IP for my office internet?
Only if something must recognise your office by its address: a client that whitelists IPs, a VPN or firewall rule, a SIP or VoIP provider, or PTA’s IP whitelisting process, which requires a static IP. For browsing, email and cloud tools with normal logins, a shared connection is fine.
How does a backup internet line work?
A dual-WAN router watches the main line and moves traffic to the second line when it fails. If the cable is unplugged it can switch at once, but if the line is up and not passing traffic, detection can take longer; one router vendor says about five minutes on its default settings. Calls in progress usually drop, and your public IP changes to the backup line’s address.
Why does my fibre internet stop during load-shedding?
The fibre box in your office (the ONT) and your router need electricity. When the power goes, they switch off unless they are on a UPS or other backup, even if the provider’s network is still working.
What internet does Uplyft provide?
Uplyft has 200 Mbps internet as standard, with faster speeds of up to 500 Mbps for private rooms at extra charge, a 200 Mbps backup line and 8 hours of electricity backup. Private rooms can also get a dedicated line with dedicated IPs on demand at extra charge.
Sources
- Zoom system requirements: Windows, macOS, Linux, Zoom Support (accessed November 2026)
- Prepare your organization's network for Teams, Microsoft Learn (accessed November 2026)
- Prepare your network for Meet meetings & live streams, Google Workspace Admin Help (accessed November 2026)
- Understanding Delay in Packet Voice Networks, Cisco (accessed November 2026)
- Connection Monitoring for WAN Failover, Cisco Meraki Documentation (accessed November 2026)
- PTA Issues Revised Quality of Service Regulations for Fixed Broadband Services, Pakistan Telecommunication Authority (accessed November 2026)
- Fibre powercut info, NOW (New Zealand internet provider) (accessed November 2026)
- FAQs, VPN Registration and IP Whitelisting System, Pakistan Telecommunication Authority (accessed November 2026)
Last updated 16 November 2026. Uplyft prices and facts on this page come from our current price list (November 2026).